Oil changes can be very costly, and therefore, it can be worth the hassle of doing a basic oil change yourself. Here’s how you do it. 카지노사이트
Car maintenance allows you to keep your vehicle running longer. One of the simplest tasks you can perform is an oil change. You don’t even need a lot of mechanical ability to learn how to change the oil in your car.
Changing the oil is often as straightforward as gathering your supplies, removing the drain plug and allowing the old oil to flow into a pan. From here, you put the drain plug back in, change the filter and replace what was removed with fresh oil.
However, in this guide we cover the steps to change your motor oil more in detail. We will also look at how often the motor oil should be changed and some other frequently asked questions.
WARNING: If you make a mistake when changing the oil, the engine may get damaged or result in an injury or even death. Always see a repair manual or let a mechanic do it if you are unsure. Ensure the vehicle is secured with jack stands before going under it.
5 Steps to Change the Oil in Your Car
- Gather Supplies
Before you perform any maintenance task, you need to have the supplies required. After all, it’s never fun to stop mid-job to go get something you should have had in the first place. 안전한카지노사이트
For this job, you want to get a wrench or socket to remove the drain plug. You will also need an oil filter wrench and oil drain pan. If you need to lift the vehicle for more clearance, a jack and jack stands will also be required.
Don’t forget to get the right type of oil for your car. You will have to choose the appropriate viscosity and determine whether you want synthetic or conventional. Finally, a new oil filter and a funnel will also be needed.
- Drain the Oil
The best time to change the oil is when the engine is warm but not burning hot. You want to make sure the exhaust has also cooled down before getting started.
Next, you should locate the drain plug. In some cases, you will need to lift the vehicle and put it on jack stands for easier access. If there is a splash shield in the way, you will need to remove this as well.
Put your drain pan directly below the plug. Take off the oil filler cap to help the fluid flow easier. With gloves on, take the drain plug out and let the old oil flow into the drain pan.
- Tighten the Plug
As the oil is being removed, clean off the oil plug to ensure a secure fit. The drain plug must be installed to appropriate specs, but it can be difficult to find the torque requirements in most owners’ manuals.
In most cases, it makes sense to use a 3/8” ratchet to tighten the plug. If you use anything larger than that, you could over-tighten the plug.
- Replace the Oil Filter
Use the special wrench to take off the oil filter. You want to do this over the drain pan because it can be a messy job with oil still found inside of the filter.
Dab a little bit of the fresh oil on your new filter’s O-ring. Spin the filter on at first. Once the O-ring makes contact, you want to tighten the filter three-quarters to a full turn further. Do not overtighten the filter or you might not be able to get it off at the next oil change. 카지노사이트 추천
If your oil filter is located on top of your engine. It is often wise to replace it before draining the oil, as this will allow more oil to drain into the oil pan.
- Pour in Fresh Oil
With the drain plug in place and the new filter on, you are ready to put more oil in the engine. Verify that you are using the right type and amount according to the owner’s manual.
With the funnel, pour the fresh oil into the filler. Put the cap back in place and run the engine for a minute to circulate the oil. Check the level and add more oil if needed. If the car is up on jacks, you will need to lower it to the level ground first.
How Often Should the Oil be Changed?
It wasn’t that long ago that all cars required oil changes every 3,000 miles. While this is still the recommended interval when using conventional oil or older cars, it’s often unnecessary with modern vehicles, no matter what your local dealership tells you.
If you choose a synthetic or synthetic blend of oil and a high-quality filter, you might be able to go up to 10,000 miles between oil changes. However, your driving style and conditions will affect how long you can go without an oil change as well.
After the first few oil changes, you will be able to determine an appropriate interval based on what the oil looks like. You want to get to it before the oil turns black but don’t need to change it if it continues looking fresh.
How Much Money is Saved Changing Your Own Oil?
If you take your vehicle to a lube shop for a conventional oil and filter change, you might spend between $40 and $80. However, getting a synthetic oil change could cost $60 to $130.
By doing it yourself, you might only spend $25 to $50 for the supplies. This translates to a potential savings of up to $100 or more each time the oil needs to be changed.
How Long Does an Oil Change Take?
If you take your vehicle to the lube shop, you can often wait in your car while they change the oil in as little as ten minutes. However, these technicians are performing oil changes all day, every day. They can practically perform the oil change in their sleep and they have advanced equipment making it easier.
If you do your own oil change, you will likely need a little more time. With the first oil change, give yourself about an hour to learn the ins and outs of the process. For repeat oil changes, you will get faster with the process. In total, it shouldn’t take you more than thirty minutes with most vehicles.